The extruding is just part of a distinct two stage extruder inside the production process. It is essential that it is specified correctly to form the final product in the material of choice at the required production rate. What feeds the material and what happens the extruder for getting together, calibration, dimensional control and handling with the final product is involving equal importance.
The specifying process starts when using the final product. Once this really is determined, the complete line can be designed. The physical weight per meter from the product will, to the specific extent, determine the size from the extruder required but it's not at all as simple as nevertheless we want to create at, say, 500kgs a hour. An extruder can be specified to do this, but it may not be possible to make, calibrate and cool the ultimate product at this amount, so the extruder can't be specified in isolation to the remaining portion of the process.
The raw material to get processed will influence the form of the extruder, by way of example, how the screw trip and compression ratio is made and how long will be barrel. This is expressed as being a ratio of the length to diameter in the processing screw. The compression ratio determines how much shear heating and work is place into the material to produces a homogenous melt. Certain materials need longer screws and barrels to boost the residence time within the extruder to give lengthier for heating and plasticising so they can increase the production quote. Different materials need better compression and shear rates to enable them being processed consistently. This can be a time/temperature relationship within this screw and barrel with the extruder. Other materials need shorter screws and barrels and lower compression rates to cut back the possibility of thermal degradation during processing. One of the most common type of extruder is a single screw machine nevertheless some thermoplastics process improved on twin screw machines which will have either parallel or conical screws.
Some two stage extruder materials process better over a machine with a vacuum vent situated for the barrel to remove volatiles plus small amounts of moisture inside the material. Thermoplastic materials procedure at different temperature needs, from as low as 100°C about 400°C+ for some engineering thermoplastics. This temperature determines the sort of heaters required, particularly for that tooling to be fitted towards the extruder. Higher temperature requirements will require more robust and more pricey heaters.
[url=https://www.haisiextrusion.com/Two-Stage-Extruder-pl51033.html]https://www.haisiextrusion.com/Two-Stage-Extruder-pl51033.html[/url]
201911ld
Event date & time: 18.05.2021 at 09:00
More details
